Delivery

Our staff will be pleased to help you with any questions about our sales range and terms of delivery (plexiglas.polymers@evonik.com).

Physical Forms
PLEXIGLAS^® molding compounds are supplied in injection molding and extrusion quality as pellets of uniform size.

Terms of Delivery
On request, you can receive information on the minimum order quantities of standard PLEXIGLAS^® molding compounds in crystal-clear and standard colors.

In the case of special and specially ordered colors, quantity variations of about ± 5% are production-related and therefore unavoidable; excess quantities must be accepted.

For further detailed information, please refer to our separate leaflet "Terms of Delivery for PLEXIGLAS® Molding Compound," which we will be pleased to send you on request.

Packaging

• 25 kg double-ply polyethylene bags
• 500 kg cartons with polyethylene lining

Further forms of packaging, such as big bags and silos, on request.

No charge is made for standard packaging.

All forms of packaging ensure that the molding compound delivered normally requires no predrying. If correctly stored, the protection offered by the packaging means that very little moisture is absorbed even after several months' storage.

Inspection and Other Certificates
On request, standard PLEXIGLAS^® molding compounds in crystal-clear and signal colors can be supplied with an inspection certificate (according to EN 10204-3.1) from quantities of 1,000 kg.

Availability
PLEXIGLAS^® molding compounds in crystal-clear and standard colors are normally available at short notice.

All other molding compounds are manufactured to order, subject to certain minimum quantities.

Color matching and new colors on request, at a charge.

For annual requirements up to 30 t, please contact our distributors.